SAMSUNG SCX-4200 reset to refill old Toner


SCX-4200When the level is near to the end, the printer gives error and stops.

 

In other words, it disallow you to use all the ink; in addiction of this, you can’t use compatible toners because they doesn’t have the chip, so the printer doesn’t restart even after you replace it.

 

The complete procedure to enter the service mode of your Samsung SCX-4300 printer, flash it and reset the ink counter.

 

DISCLAIMER: as usual, I am not responsible for any damage you can cause with this procedure!download_button

  • First of all, download the software pack: SCX-4300.rar and extract it in your hard disk (C:\), creating a C:\scx-4300 folder;
  • Now fire up a command line window: click Start -> Execute…, type CMD and press enter;
  • In the black command line window type cd / and press enter; then type cd scx-4300 and press enter again;
  • Type fix4300.exe SCX4300_V1.13_Fact_romdl.hd and press enter; this script will create a new file in the folder, named FIX_SCX4300_V1.13_Fact_romdl.hd. This file is created starting from the unique serial of your printer, and it will replace the original one in your printer flash memory.
  • Let’s go to service mode: press the following buttons on your SCX-4300 panel:MENU
  • COPIES
    <
    >
    MENU
    >

  • You have to execute the entire sequence quickly! If nothing “strange” happens, just press “STOP” and redo it.

  • If everything is done, you should see “TECH MODE“ in the display of the printer;
  • Press the “MENU” button, follow these steps: DATA SETUP -> FLASH UPGRADE -> LOCAL, then press “OK”;
  • Go back to your computer: you’ve to drag and drop the file we created before (FIX_SCX4300_V1.13_Fact_romdl.hd) to the icon named usbprns2.exe)
  • The display on Samsung SCX-4300 should say:
    - Data receiving
    - Flash erasing
    - Flash Programming
    - Checksumming
    - Download Ok
  • Then the printer will reboot. You unlocked it!
  • When the printer is ready, just repeat the sequence you used before to enter the “TECH MODE” and follow these steps: DATA SETUP -> CLEAR COUNTERS -> CLEAR ALL CNT.
  • The status LED on the printer should become yellow, then finally green. Now you can print again, using all the remaining ink!

{ 1 comments ... read them below or add one }

James Werk said...

It is much batter to refill Ink and Toner Cartridges for your genuine printer instead of buying new every time.

Post a Comment